1/16" Lincore® 60-O Hard Facing MIG Wire 10 lb Plastic Spool Back and Wrist Supports 59 and is rated at

59 and is rated at a moderate work level in -50°F // -46°C temperatures for up to 5 hours (rated up to a full 8-hour workday at -45°F // -43°C)

- Cover Material: Field-Flex

Good resistance to cross checking

It meets ANSI S3

The FTKV350 features 10 gauge yellow Kevlar® shell with a green nitrile coating on the palm and fingertips

1/16" Lincore® 60-O Hard Facing MIG Wire 10 lb Plastic Spool Back and Wrist Supports 59 and is rated atItem Details: LINCORE 60 O Flux Cored Wire typical application on Bucket lips, Crusher hammers, Ore chutes, Dozer blades and Ripper teeth deposits feature higher alloy levels than to resist both abrasion and moderate impact. Can be used at temperatures up to 704C (1300F) Deposit thickness limit is two layers unless high travel speed is used to obtain very closely spaced check cracks. Many layers can be used with high travel speed and small bead sizes